Water-to-Go uses three different technologies forged together in one filter to filter over 99.9% of all contaminants in water. The medium used in the filter was designed for the NASA space programme and consists of:

A) Filter medium with one of the smallest pores sizes ever developed for water filtration
B) The traditional technology of activated carbon particles (that reduce bad taste and odours) used within the filter medium so that it is much more effective as there is less adhesive holding the carbon in place thereby providing a greater surface area for the carbon to work
C) The medium releases a positive hydrostatic charge when it comes into contact with the water
No other water filter technology combines these three technologies and delivers results at low cost.

Yes. All you need to do is ensure the filter is wet through and flush once to activate it. We suggest the first time you use a new filter you fill the bottle up and turn it upside down, submerging the filter for 15 minutes. Then gently squeeze out the contents until the water runs clear.
We have created a short video showing how to activate your filter.

Yes. You can view these on our website, We have been tested on three continents by internationally renowned laboratories in London, Florida and Bangalore.
We have further test results coming in from additional laboratories in Europe.

1) Water-to-Go uses mechanical filtration; a very small pore size which stops contaminants passing through.
2) Electrical (by a positive charge) which reduces the pore size even further and attracts the contaminants like a magnet would, trapping them inside the filter.
3) Finally our filters use carbon but instead of using adhesives to glue the carbon particles together, (which vastly reduces the carbon’s efficiency) it is contained within the membrane, helping to reduce contaminants whilst eliminating bad tastes and odours.
Try filtering water from your domestic filter and taste the difference!